Siemens RUGGEDCOM RSG2200 Guia do Utilizador descarregar pdf (Página 95)

RUGGEDCOM ROS

User Guide

Chapter 4

System Administration

Configuring an Alarm 83

Figure 46: Latched Alarms Table

To clear the passive alarms from the list, do the following:

1. Navigate to Diagnostics » Clear Latched Alarms. The Clear Latched Alarms form appears.

Figure 47: Clear Latched Alarms Form

1. Confirm Button

2. Click Confirm.

Section 4.4.3

Configuring an Alarm

While all alarms are pre-configured on the device, some alarms can be modified to suit the application. This

includes enabling/disabling certain features and changing the refresh time.

To configuring an alarm, do the following:

IMPORTANT!

Critical and Alert level alarms are not configurable and cannot be disabled.

1. Navigate to Diagnostic » Configure Alarms. The Alarms table appears.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 169 170

Sem comentários

Siemens RUGGEDCOM RSG2200 Guia do Utilizador Página 95