Siemens RUGGEDCOM RS8000 Especificações descarregar pdf (Página 13)

RUGGEDCOM RS8000

Installation Guide

Chapter 2

Installing the Device

Mounting the Device to a Panel 7

Figure 3: Rack Mounting

1. Rack Mount Adapter 2. Screw

3. Insert the rack mount adapter and device assembly into the rack.

NOTE

Since heat within the device is channelled to the enclosure, it is recommended that 1 rack-unit

of space, or 44 mm (1.75 in), be kept empty above the device. This allows a small amount of

convectional airflow.

Forced airflow is not required. However, any increase in airflow will result in a reduction of ambient

temperature and improve the long-term reliability of all equipment mounted in the rack space.

4. Secure the adapter to the rack using the supplied hardware.

Section 2.1.3

Mounting the Device to a Panel

To mount the device to a panel, do the following:

1. Place the device against the panel and align the adapters with the mounting holes.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Sem comentários

Siemens RUGGEDCOM RS8000 Especificações Página 13