Siemens ET8 Series Manual do Utilizador descarregar pdf (Página 12)

G3 Electronics

00497GB-2009/R01

X024 - 12

www.asconumatics.eu

PROFIBUS DP

PROFIBUS DP is a vendor-independent, open

fieldbus protocol designed for communication

between automation control systems and distributed

I/O at the device level.

Numatics’ G3 PROFIBUS DP nodes have an

integrated graphic display and are capable of

addressing combinations of up to 544 Inputs /

Outputs.

The G3 PROFIBUS DP nodes have been designed

and tested to conform to the PROFIBUS standard

EN50170. Certification has been done by the

PROFIBUS Interface Center (PIC) according to the

guidelines determined by the PROFIBUS Trade

Organization (PTO). The certification process

ensures interoperability for all PROFIBUS devices.

More information regarding PROFIBUS can be

obtained from the following WEB site:

www.profibus.com

Technical Data

ELECTRICAL DATA VOLTAGE CURRENT

Node Power at Max. Brightness 24 VDC +/- 10% 94 mA

Valves & Discrete I/O 24 VDC +/- 10% 8 A maximum

Power Connector Single key 5 pin 7/8” MINI type (male)

Communication Connector Single reverse key (B-Coded) 5 pin M12 type (1 male and 1 female)

LED's Module Status and Network Status

OPERATING DATA

Temperature Range (ambient) -23º to +50º C

Humidity 95% relative humidity, non-condensing

Vibration / Shock IEC 60068-2-27, IEC60068-2-6

Moisture Protection IP65, IP67 (with appropriate assembly and termination)

CONFIGURATION DATA

Graphic Display Display used for setting Node Address, Baud Rate, Fault / Idle Actions, and all other system settings.

MCM (Manual Conﬁ guration Module) Optional module containing DIP switches for setting node address and baud rate.

ARM (Auto Recovery Module) Optional module that contains automatic recovery of system setting in the event of total or partial system failure

Maximum Valve-Solenoid Outputs 32

Maximum Addressable I/O Points Various combinations of 544 inputs / outputs (1200 bits)

NETWORK DATA

Supported Baud Rates Auto-Baud from 9.6k to 12M Baud

Bus Connector Single reverse key (B-Coded) 5 pin M12 type (1 male and 1 female)

Diagnostics Power, short, open load conditions and module health are monitored

Special Features Supports Class 2 PROFIBUS-DP master with auto-conﬁ guration and fail-safe device settings

WEIGHT

PROFIBUS-DP

Communication Module

227g

DESCRIPTION

REPLACEMENT

PART NUMBER

PROFIBUS DP

communications module

(node)

240-239

PROFIBUS DP

communications module

(node)

Automotive industry

240-301

Profibus DP

COMM

MALE FEMALE

Pin 1 = +5 VDC

Pin 2 = Data Line A

Pin 3 = Common 0 VDC

Pin 4 = Data Line B

Pin 5 = Earth Ground

POWER

MALE

Pin 1 = 0 VDC (valves & outputs)

Pin 2 = 0 VDC (node & inputs)

Pin 3 = Earth Ground

Pin 4 = +24 VDC (node & inputs)

Pin 5 = +24VDC (valves & outputs)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comentários a estes Manuais

Sem comentários

Siemens ET8 Series Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Siemens ET8 Series