Siemens ET8 Series Manual do Utilizador descarregar pdf (Página 10)

G3 Electronics

00497GB-2009/R01

X024 - 10

www.asconumatics.eu

Modbus TCP/IP

Ethernet used throughout the world to network millions

of PC’s has now evolved into a viable industrial network.

Ethernet is an open architecture high-level communication

network that meets the demands of today’s industrial

applications requiring high-speed (10/100 Mbit/s), high-

throughput and flexibility. Various application layers for

this protocol including EtherNet/IP™ and Modbus TCP/

IP. Additionally, Ethernet technology can integrate an

on-board Web server, which can make the node readily

accessible to any standard Web browser for configuration,

testing and even retrieval of technical documentation.

Numatics’ G3 Ethernet nodes have an integrated graphic

display and are capable of addressing combinations of up

to 544 Inputs / Outputs.

The G3 Modbus TCP nodes have been tested and

approved for conformance by the ODVA.

More information about Modbus TCP and the ODVA can

be obtained from the following WEB site: www.odva.org

Technical Data

ELECTRICAL DATA VOLTAGE CURRENT

Node Power at Max. Brightness 24 VDC +/- 10% 91 mA

Valves & Discrete I/O 24 VDC +/- 10% 8 A maximum

Power Connector Single key 4 pin 7/8" MINI type (male)

Communication Connector D-coded 4 pin M12 type (female)

LED's

Module Status, Network Status

and Activity/Link

OPERATING DATA

Temperature Range (ambient) -23º to +50º C

Humidity 95% relative humidity, non-condensing

Vibration / Shock IEC 60068-2-27, IEC60068-2-6

Moisture Protection IP65, IP67 (with appropriate assembly and termination)

CONFIGURATION DATA

Graphic Display Display used for setting IP Address, Subnet mask, Fault / Idle Actions, DHCP / BootP and all other system settings.

MCM (Manual Conﬁ guration Module) Optional module containing DIP switches for setting IP address.

ARM (Auto Recovery Module) Optional module that contains automatic recovery of system setting in the event of total or partial system failure

Maximum Valve-Solenoid Outputs 32

Maximum Addressable I/O Points Various combinations of 544 inputs / outputs (1200 bits)

NETWORK DATA

Supported Baud Rates 10 Mbit / 100 Mbit

Bus Connector D-coded 4 pin M12 type (female)

Diagnostics Power, short, open load conditions and module health are monitored

Special Features Integrated web server and fail-safe device settings

WEIGHT

Ethernet Communication Module 255g

DESCRIPTION

REPLACEMENT

PART NUMBER

Modbus TCP/IP

communications

module (node)

240-292

Modbus TCP/IP

COMM FEMALE

Pin 1 = TX+

Pin 2 = RX+

Pin 3 = TX-

Pin 4 = RX-

POWER MALE

Pin 1 = +24 VDC (valves & out)

Pin 2 = +24 VDC (node & in)

Pin 3 = 0 VDC (node & in)

Pin 4 = 0 VDC (valves & out)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comentários a estes Manuais

Sem comentários

Siemens ET8 Series Manual do Utilizador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Siemens ET8 Series