Siemens EK 746 Series Instruções de Operação descarregar pdf (Página 30)

Mounting

5.4 Mounting with mounting plate

SCALANCE W786 outdoor access point

30 Operating Instructions, 06/2013, A5E02280428-08

5.4.4

Fitting the mounting plate to a DIN rail

NOTICE

No DIN rail mounting when used on ships

If the SCALANCE W786 is used on ships, the DIN rail mounting is not adequate to hold the

device in place. In such cases, mount the SCALANCE W786 on an S7-300 rail or on an S7-

1500 rail.

Procedure

Figure 5-11 Mounting plate with fittings for DIN rail mounting

Follow the steps below to fit the mounting plate to a DIN rail:

1. Place the mounting plate with the two catches (position A in the figure above) on the

upper edge of the DIN rail.

2. Pull down the DIN rail sliding catch (position B in the figure above) and press the

mounting plate against the DIN rail until the sliding catch engages.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 89 90

Sem comentários

Siemens EK 746 Series Instruções de Operação Página 30