Siemens EA 710 Series Manual do Utilizador descarregar pdf (Página 7)

SSA/P Series Electronic Valve Actuator Technical Instructions

24 Vac Floating or 0 to 10 Vdc Control Document Number 155-710

September 16, 2009

Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as

Siemens Industry, Inc.

Building Technologies Division

1000 Deerfield Parkway

Buffalo Grove, IL 60089

+ 1 847-215-1000

Your feedback is important to us. If you have

comments about this document, please send them

to sbt_technical.editor.us.sbt@siemens.com

Document No. 155-710

Printed in the U.S.A.

Page 7

Troubleshooting

See Wiring for proper connections.

If the actuator does not provide full flow or full close off, check that the actuator is

properly attached to the valve. If not, turn power off, tighten the bonnet ring on to the

valve completely, and power up to recalibrate.

If the actuator becomes inoperative, replace it.

Dimensions

Inches (Millimeters)

Figure 11. Dimensions of the SSA/P Series Actuator in Inches (mm).

Service envelope

Minimum access space recommended:

8-inches (200 mm) above the actuator and beside the terminal plug.

1 2 3 4 5 6 7

Sem comentários

Siemens EA 710 Series Manual do Utilizador Página 7