Siemens Advance Network Gateway Manual do Utilizador descarregar pdf (Página 25)

DataNET Copper Connections, Continued

Instructions,

continued

Step Action

3. Strip the insulation ¼ -inch back from each of the incoming

copper leads.

4. To make the connections easier we have made the ANCB

port connector a removable connector. Grasp the top

portion of the connector and pull it straight out from the

base connector. Loosen all the top wire retaining screws

from the removed connector. All connections will be made

to this connector.

5. Connect Channel A leads to pins 1 through 3 and Channel

B leads to pins 4 through 6. Tighten down the retaining

screws.

DataNET PORT

CONNECTIONS

Pin 1

Pin 2

−

Pin 3- Ground

Pin 4-

Pin 5

−

Pin 6- Ground

6. Plug Port connector back into its base.

2000592-001 Installation • 15

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Sem comentários

Siemens Advance Network Gateway Manual do Utilizador Página 25