Siemens RDU340 Instruções de Operação descarregar pdf (Página 21)

21 / 32

Siemens RDU340… Basic Documentation CE1P3078en

Building Technologies Functions 2014-09-05

# Parameter

Factory

setting

Setting range

RDU340

Service Level

P01 Control sequence

(for application "single duct" only)

1 (Cooling only) 0:= Heating only

1:= Cooling only

2:= Manual H/C

3:= Auto changeover



P02 Mode selection via user operating mode button 1 (Stb, Comf) 1 = Stb,Comf

2 = Stb, Comf, Eco



P04 Selection of °C or °F °C (0) °C

(1) °F



P05 Sensor calibration 0.0 K – 3 ... +3 K



P06 Standard temperature display 0 (Room temp) 0:= Room temperature

1:= Setpoint



P07 Additional user info 0 (no display) 0:= no display

1:= Temp in °C and °F



P08 Comfort basic setpoint 21 °C 5 ... 40 °C



P09 Minimum setpoint limitation for Comfort (WminComf) 5 °C 5 ... 40 °C



P10 Maximum setpoint limitation for Comfort (WmaxComf) 35 °C 5 ... 40 °C



P11 Heating setpoint for Energy Saving (WheatEco) 15 °C OFF, 5 °C…WcoolEco



P12 Cooling setpoint for Energy Saving (WcoolEco) 30 °C OFF, WheatEco…40 °C



P14 Keypad lock

(Press the operating mode button

for 7 seconds to enable

or disable the keypad lock)

0 (Unlocked) 0:= Unlocked

1:= Auto lock

2:= Manual lock



 P01 is not available when the controller is commissioned as single duct with el.

heater (DIP switch #1 = ON)

 P02 is not available when the controller is commissioned for manual

heating/cooling changeover (P01=2)

 Parameter display depends on selected application and function

(x) Not available

Control parameters

Note

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentários a estes Manuais

Sem comentários

Siemens RDU340 Instruções de Operação Página 21

Comentários a estes Manuais

Manuais e produtos relacionados com Termóestatos Siemens RDU340