Siemens TC65 Manual do Utilizador descarregar pdf (Página 25)

TC65Smart

User Manual

Rev. 2-1.0 25

3.4. Indication Mechanisms.

The Terminal is equipped with 4 LED indicators for visual control of operation.

Fog. 12

Indicator

PWR/STATE

Indicator

“DBG”

Indicator

SIM1

Indicator

“SIM2”

• The operation of the indicators “SIM1” and “SIM2” has already been described in

Clause 3.2.

• The indicator “DBG” is connected in the Terminal to the output GPIO5 of the module

TC65. It flashes upon recording of log. “1” in GPIO5 by means of АТ commands for

GPIO control (or through JAVA) and can be applied by the user for choice.

• The indicator “PWR/STATE” is designed for the terminal status indication.

o If it is not flashing – electric power supply is not fed;

o If it is flashing continuously – the module is started and operates normally;

o Frequent flashing – it determines that the Controller is enabling or disabling

the module;

o Rare flashing with predominant off-status - power is supplied, the module is

disabled;

o Rare flashing with predominant on-status – the terminal is conducting the

DTR signal expectation for either enabling or disabling.

1 2 ... 20 21 22 23 24 25 26

Sem comentários

Siemens TC65 Manual do Utilizador Página 25