Siemens TC35 Terminal Especificações descarregar pdf (Página 56)

AT Command Set

TC3X_ATC_01_V04.00 Page 56 of 204 29.05.2002

3.27 AT+FVRFC Vertical resolution format conversion

Test command

AT+FVRFC =?

This command determines the DCE response to a mismatch between the vertical

resolution negotiated for the facsimile session and the Phase C data desired by

the DTE.

Response

(List of supported mismatch checking modes) OK

Parameter

See write command

Read command

AT+FVRFC?

Response

<vrfc> OK

Parameter

See write command

Write command

AT+FVRFC

=<vrfc>

Response

Parameter

<vrfc> 0 disable mismatch checking.

2 enable mismatch checking, with resolution conversion of 1-D

data in the DCE, and an implied AT+FK command executed

on 2-D mismatch detection

Reference

EIA PN-2388

Note

Used for Fax class 2 only

The following AT commands are dummy commands. Invoking these commands will not cause

ERROR result codes, but these commands have no functionality.

AT+FAA Auto Answer mode

AT+FECM Error Correction Mode control

AT+FLNFC Page Length format conversion

AT+FLPL Indicate document available for polling

AT+FMINSP Minimum Phase C speed

AT+FRBC Phase C data receive byte count

AT+FREL Phase C received EOL alignment

AT+FSPL Enable polling

AT+FTBC Phase C data transmit byte count

AT+FWDFC Page width format conversion

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 203 204

Comentários a estes Manuais

Sem comentários

Siemens TC35 Terminal Especificações Página 56

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Siemens TC35 Terminal