Siemens SIPART PS2 6DR50xx Instruções de Operação Página 153

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 242
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 152
Parameterizing/addressing
10.4 Description of parameters
SIPART PS2 with and without HART communications
Operating Instructions, 09/2007, A5E00074631-07
153
In advanced diagnosis, the threshold of the fault message is displayed using columns in
addition to the error code. These columns are shown on the digital display as follows:
Figure 10-6 Display of a threshold 1 error message
Figure 10-7 Display of a threshold 2 error message
Figure 10-8 Display of a threshold 3 error message
The factory setting is "OFF".
10.4.3 Description of parameters A through P
10.4.3.1 Description of parameter A
A.
PST - partial stroke test
Use this parameter to activate the partial stroke test for cyclic or manual test of up/down and
servo solenoid valves. Set the "On" parameter value to activate the test. Sub-parameters are
displayed. If the sub-parameters are set to the desired parameter values, initiate the partial
stroke test using:
Buttons on the device
A binary input
Communication
A cyclic test interval
Sub-parameters are described below.
The factory setting is "OFF".
Vista de página 152
1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 241 242

Comentários a estes Manuais

Sem comentários