Siemens EF 83P Series Manual de Instruções descarregar pdf (Página 13)

1-3

1.2.2 Machine Installation Precautions

Installation Site:

(1) Allow space for maintenance.

Install the machine so that the doors of the machine and

the NC unit can be opened without interference.

(2) Do not put things on the floor around the machine.

Keep the floor dry. If coolant or lubricating oil is spilled.

Wipe it up immediately.

(3) The machine and the NC unit must not be subject to

direct sunlight. Chips, coolant, and oil must not be

splashed on the machine or the NC unit.

The machine and the NC unit must not subject to any

excessive vibrations.

Ambient temperature: 0 to 40



Humidity: 75%RH or lesswithout condensation

(4) Make sure that the floor is strong enough to support the

machine. The floor must not be sloped or irregular in any

way.

(5) A number of cooling fans are used inside the floor.

Therefore, dust and mist must be kept to a minimum.

(6) Allow space for easy removal of the chip conveyor and

the coolant tank.

Power Supply:

(1) Only an authorized electrical technician should perform

work with the power cable connections.

(2) No electrical noise generating sources, such as electric

welders or electric discharge machines, can be near the

machine. Take care to insulate the machine from any

adverse effects that might be caused by nearby

equipment.

(3) An excessive voltage drop due to an insufficient power

capacity will cause a malfunction of the NC unit. The

power cables must be connected directly and

independently to the plant power distribution panel.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 112 113

Sem comentários

Siemens EF 83P Series Manual de Instruções Página 13