s C2-010/C2-010-I ADSL2+ Router User’s Manual Rev: 1.3 2005/1210 No part of this publication may be reproduced in any form by any means witho
C2-010 / C2-010-I ADSL2+ Router User’s Guide 2.3.4 Hub or Switch to ADSL2+ Router Connection Connect the ADSL2+ Router to an uplink port on an Ethern
C2-010 / C2-010-I ADSL2+ Router User’s Guide 3. Before Configuring ADSL2+ Router The factory default settings of ADSL2+ Router optimized all function
C2-010 / C2-010-I ADSL2+ Router User’s Guide 3-2 3.4 First Time Log on After inputting the forgoing IP address on URL address bar, a new window appe
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4. Web-based Management 4-1 4.1 Summary When you successfully login the Basic directory will display the
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4-2 Each tab displays menu buttons located in the left hand panel of the web interface. The table below l
ADSL2+ Router User’s Guide Figure 4-3 WAN Current Settings Menu Select the connection type used for your account. The menu will display settings that
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4.2.1 Configuring a Bridged Connection for the WAN A bridged connection between your ISP and your LAN (t
ADSL2+ Router User’s Guide 4. When you are satisfied that all the WAN settings are configured correctly, click on the Apply button. Note: Some accoun
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4-6 3. Under the Static IP heading, choose the Connection Type from the pull-down menu. This defines bo
ADSL2+ Router User’s Guide 4-7 Route NAT Enabled/Disabled − this enables or disables NAT (Network Address Translation) on the router. This should nor
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4.2.3 Dynamic IP Address Connection for WAN A Dynamic IP Address connection configures the Router to au
ADSL2+ Router User’s Guide 4-9 5. NAT should remain enabled. If you disable NAT, you not be able to use more than one computer for Internet connection
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4.2.4 PPPoE and PPPoA Connection for WAN Follow the instructions below to configure the Router to use a
ADSL2+ Router User’s Guide 4-11 7. NAT should remain enabled. If you disable NAT, you not be able to use more than one computer for Internet connectio
C2-010 / C2-010-I ADSL2+ Router User’s Guide 4-12 4.3 DHCP Configuration To display the DHCP Server menu, click the DHCP button in the Home director
ADSL2+ Router User’s Guide 4.3.3 Disabling the DHCP Server To disable DHCP, click to select the No DHCP radio button and click on the Apply button.
C2-010 / C2-010-I ADSL2+ Router User’s Guide So, if you want to use an IP addressing scheme that is different from the 192.168.1.x/255.255.255.0 schem
C2-010 / C2-010-I ADSL2+ Router User’s Guide 5. Advanced Configuration This chapter introduces and describes the management features that have not be
C2-010 / C2-010-I ADSL2+ Router User’s Guide expose it under insecurity risk; thus suggest not use this option unless no other alternatives. DDNS This
ADSL2+ Router User’s Guide 5-3 5.2 Virtual Server Configuration To view the following window, click on the Advanced tab at the top of the window and
C2-010 / C2-010-I ADSL2+ Router User’s Guide Contents 1.1 Device Introduction...
C2-010 / C2-010-I ADSL2+ Router User’s Guide circumstances. Destination Port Enter the port number of the device on the WAN side of the network that w
ADSL2+ Router User’s Guide 5-5 5.4 Outbound IP Filter Configuration Packet filtering is a basic security measure that should be used on any network t
C2-010 / C2-010-I ADSL2+ Router User’s Guide 5-6 Filter Settings Description Src IP Address Select Any IP, Single IP, or IP Range from the drop-down m
ADSL2+ Router User’s Guide 5-7 Filter Settings Description Src IP Address Select Any IP, Single IP, or IP Range from the drop-down menu and then enter
C2-010 / C2-010-I ADSL2+ Router User’s Guide 5-8 5.6 Firewall This Router comes equipped with a firewall. The Firewall configuration screen allows th
ADSL2+ Router User’s Guide The Service Filtering options allow you to block FTP, Telnet response, Pings, etc, from the external network. Check the ca
C2-010 / C2-010-I ADSL2+ Router User’s Guide 5-10 5.8 RIP Figure 5-9. RIP menu RIP can be enabled on any existing WAN or LAN interfaces. It may be sp
ADSL2+ Router User’s Guide 5-11 5.9 PPP When the WAN connection is configured for either PPPoA or PPPoE, you can configure the Router’s PPP session to
C2-010 / C2-010-I ADSL2+ Router User’s Guide 5-12 5.10 ADSL The ADSL Configuration page allows the user to set the configuration for ADSL protocols. F
ADSL2+ Router User’s Guide 5-13 5.11 ATM VCC The ATM Virtual Circuit connection menu is used to configure the WAN connection. If you are using multipl
C2-010 / C2-010-I ADSL2+ Router User’s Guide 6.3 Save ADSL2+ Router Configuration Settings...
C2-010 / C2-010-I ADSL2+ Router User’s Guide 6. Tools Click the Tools tab to reveal the menu buttons for various functions located in this directory.
C2-010 / C2-010-I ADSL2+ Router User’s Guide 6-2 6.2 Configure System Time Use the Time menu to configure the ADSL2+ Router’s system time manually or
ADSL2+ Router User’s Guide 6-3 6.4 6.5 6.6 Restore Factory Default Settings To reset the ADSL2+ Router to its factory default settings, click the Rest
C2-010 / C2-010-I ADSL2+ Router User’s Guide Figure 6-5. Firmware Upgrade To upgrade firmware, type in the name and path of the file or click on the
C2-010 / C2-010-I ADSL2+ Router User’s Guide 7. ADSL2+ Router Status Information Use the various read-only menus to view system information and monito
C2-010 / C2-010-I ADSL2+ Router User’s Guide The log menu buttons in this function as follow: First Page Display the first page of the log. Last Pag
ADSL2+ Router User’s Guide 7-3 7.4 ADSL Status Use the ADSL Status information and the Test page for troubleshooting the ADSL connection. Figure 7-4.
C2-010 / C2-010-I ADSL2+ Router User’s Guide 8-1 8.1 8. Attachments Technical Specifications Hardware One ADSL port RJ-11, inner pair (pin 2,3) Stan
C2-010 / C2-010-I ADSL2+ Router User’s Guide 1. Overview The ADSL2+ Router provides integrated voice and data services over ADSL “Asymmetrical Digita
C2-010 / C2-010-I ADSL2+ Router User’s Guide 8-2 Spanning Tree IEEE 802.1d Dynamic Learning Up to 1000 MAC addresses Bridged/Routed Ethernet over ATM
C2-010 / C2-010-I ADSL2+ Router User’s Guide 9. Appendix A – WEEE B2C All electrical and electronic products should be disposed of separately fr
C2-010 / C2-010-I ADSL2+ Router User’s Guide 2. Installation Planning Before installing the ADSL2+ Router, you should gather information and equipmen
C2-010 / C2-010-I ADSL2+ Router User’s Guide 2.2.2 Rear Panel Ethernet port − to your PC’s Ethernet port Power input − Connect power adapter
ADSL2+ Router User’s Guide 2.3.3 Computer to ADSL2+ Router Connection Figure 2-3 Computer to ADSL2+ Router Connection You can connect the ADSL2
Comentários a estes Manuais